Best Clear Drain Clog in Seattle WA
I would NOT recommend Beacon Plumbing! We had a clogged sink and were charged $1100 for one hour of work to clear it and replace two old p-traps. 24 hours later the clog was back, and Beacon would not come back to fix it without another charge. Their commission-based plumber was not thorough and did not identify and fix the real problem (a blockage further down the line). We were forced to hire another plumber to identify and fix the problem. Quality Plumbing was much more reasonable and thorough and charged us only $250 to fix the problem.
www.beaconplumbing.net
515 7th Ave S, Seattle, WA 98104
Plumber was professional, good communication overall. We had a kind of complicated issue but they worked very hard !
www.rotorooter.com
6321 7th Ave S, Seattle, WA 98108
Bob Oates is my go to plumber. They are the most responsive contractor I’ve hired. They respond immediately and have always had dispatchers available within my time frame. I just had a leak fixed and hose bib installed by Konrad, who did a terrific job.
boboates.com
1817 Queen Anne Ave N # 312, Seattle, WA 98109
Great Work
Thank You Collin and his teem got the work done and on time
and cheaper than the other Bids i got...
Thank You Again Dirt Cheap Sewer ...
dirtcheapsewer.com
Thank You Collin and his teem got the work done and on time
and cheaper than the other Bids i got...
Thank You Again Dirt Cheap Sewer ...
7919 Wallingford Ave N, Seattle, WA 98103
Budget sewer did an excellent job for us. They have all the necessary equipment, experience and ability to take on the work. They work quickly and efficiently, almost making it look too easy. The City inspection was passed with no problems. The damage to the driveway, the deck and the shrubbery was minimal, saving me thousands in repairs. A competitor head wanted to tear up everything but Budget Sewer did minimal damage at a lower cost!
budgetsewer.com
4321 Leary Wy NW, Seattle, WA 98107
Daniel did a great job. He communicated clearly throughout the process and gave me honest input on products. I also appreciated the little things, like wearing shoe covers without me asking. I would definitely use Wezee’s again!!
wezeesplumbing.com
12600 SE 38th St Suite 235, Bellevue, WA 98006
It's such a relief to have Joe to turn to for plumbing issues. I recently discovered a leak under my kitchen sink, thanks to the water alarm that kept it from becoming a bigger problem. There are several plumbers that are rated highly here in West Seattle but the reviews for Simple Plumber spoke to Joe's consistent integrity and skills, both of which are important to me. It's clear that his clients trust him -- trust that I see is well deserved.
When he arrived, he promptly diagnosed the issue as an aging (11-year- old) failing faucet. He recommended his three top brands, and I called my favorite hardware store (Junction True Value) to see if they had any in stock. They had all three brands and were waiting for him when he arrived a few minutes later. He selected a terrific faucet and then immediately got to work installing it when he got back.
In addition to doing excellent work, he recommended some other service people, who I will call on as well. Some of the most helpful tips concerned what to look for when repairing/lining a sewer, which I'll need to do at some point in the next several years. I had just gotten conflicting reports from a couple different companies. Joe recommended a company I was not familiar with, and told me that the lining comes in two thicknesses -- one super thin and the other quite a bit thicker. He said that if we don't specify that we want the thicker lining, companies will often install the thin one, which doesn't hold up nearly as long. But instead of lining, he strongly recommended pipe bursting for a fix that will last decades. I also learned from him that hydro-jetting is much easier on the sewer pipe than grinding (which had been recommended to me by someone else). All of this was extremely helpful information.
Thank you Joe for your excellent work and advice. It's a great comfort knowing that I can turn to you the next time I need a plumber!
www.simpleplumber.biz
When he arrived, he promptly diagnosed the issue as an aging (11-year- old) failing faucet. He recommended his three top brands, and I called my favorite hardware store (Junction True Value) to see if they had any in stock. They had all three brands and were waiting for him when he arrived a few minutes later. He selected a terrific faucet and then immediately got to work installing it when he got back.
In addition to doing excellent work, he recommended some other service people, who I will call on as well. Some of the most helpful tips concerned what to look for when repairing/lining a sewer, which I'll need to do at some point in the next several years. I had just gotten conflicting reports from a couple different companies. Joe recommended a company I was not familiar with, and told me that the lining comes in two thicknesses -- one super thin and the other quite a bit thicker. He said that if we don't specify that we want the thicker lining, companies will often install the thin one, which doesn't hold up nearly as long. But instead of lining, he strongly recommended pipe bursting for a fix that will last decades. I also learned from him that hydro-jetting is much easier on the sewer pipe than grinding (which had been recommended to me by someone else). All of this was extremely helpful information.
Thank you Joe for your excellent work and advice. It's a great comfort knowing that I can turn to you the next time I need a plumber!
8439 24th Ave SW, Seattle, WA 98106
We had several plumbers come out to fix a leaky Kohler shower/tub valve, and all of them told us we'd have to cut a hole through our shower enclosure to replace the whole thing.
We called Joe from TSCO from a recommendation from a friend, and he was great. He let us e-mail photos of the valve to him and he arrived with the necessary parts already in hand, and there was no need to cut a hole in the shower. He also squeezed us in two days early, too! The end result? Our valve is no longer leaking. Plus, he fixed a rust stain in the tub and replaced a toilet flapper while he was here.
Joe is very thorough, knowledgeable and does a quality job. He's more expensive than some other plumbers we called, but clearly you get what you pay for. TSCO is definitely our plumber of choice!
www.simpleplumber.biz
We called Joe from TSCO from a recommendation from a friend, and he was great. He let us e-mail photos of the valve to him and he arrived with the necessary parts already in hand, and there was no need to cut a hole in the shower. He also squeezed us in two days early, too! The end result? Our valve is no longer leaking. Plus, he fixed a rust stain in the tub and replaced a toilet flapper while he was here.
Joe is very thorough, knowledgeable and does a quality job. He's more expensive than some other plumbers we called, but clearly you get what you pay for. TSCO is definitely our plumber of choice!
8439 24th Ave SW, Seattle, WA 98106
Josh did a great job installing our new toilet and diagnosing a variety of other issues we reported -- and he didn't try and invent any expensive causes for those issues.
wezeesplumbing.com
126 S Spokane St Suite A, Seattle, WA 98134
Complete Trenchless provided a same-day quote, performed the work quickly and effectively. Highly recommended!
completetrenchless.com
5608 17th Ave NW, Seattle, WA 98107
Queen Plumbing is great.
Steve replaced an old water heater for me, it was very easy and fast to discuss the project, find the right solution, get a quote and get the job scheduled. He was very responsive and clear.
On the day he showed up right on time, and was done fairly quickly, taking the time to answer all of my questions about the new tank and how it operates. And making sure all the old parts (the vent and the wall mounts) are in good shape.
He is definitely at the top of my list for my next plumbing project.
www.queenplumbingllc.com
Steve replaced an old water heater for me, it was very easy and fast to discuss the project, find the right solution, get a quote and get the job scheduled. He was very responsive and clear.
On the day he showed up right on time, and was done fairly quickly, taking the time to answer all of my questions about the new tank and how it operates. And making sure all the old parts (the vent and the wall mounts) are in good shape.
He is definitely at the top of my list for my next plumbing project.
Seattle, WA
they charged us way to much money to uncover the top of the septic tank.
www.ecoserviceswa.com
126 S Spokane St, Seattle, WA 98134
Please do NOT use Beacon.
I had a very unpleasant experience using Beacon Plumbing. First my hydronic heating system failed one night, and I troubleshoot the system to the best of my abilities. I reasoned that the circulator pump had failed. Not knowing the system well, I opted to call a plumber just to confirm my suspicions, or tell me what was really wrong with my heat. I called Beacon since they were a 24 hour service call, and I had no other experience. I WISHED I READ THE OTHER REVIEWS ON YELP BEFORE I CALLED! While on the phone I asked if they were familiar with hydronic heating and they were very quick to tell me yes, they were. When the service tech got there and I showed him the system, he was very lost. After a while he troubleshot the system and told me the exact thing I told him what I thought was wrong. He then proceed to tell me that I needed a $962 replacement pump, I bite my lip and said yes, because I did not want my kids to be without heat during the night. He then went through his truck and said he didn't have one and couldn't get one till tomorrow. I should have said don't worry about it and I would get one, but I didn't for some reason.
The next day he showed up and hour and a half later than when he said he would be there or call to update me. They installed the pump within 30 min and got the heat running. Later I looked up the pump that they installed and found out it retails for only $250!
I PAID $962!
I called Beacon and asked why a pump that retails for only $250 was $962 and they could only tell me that they include labor in the cost of the part. I asked why they could not tell me what the part actually cost and how much labor was and they refused. I was immediately transfered to someone else that would say the same thing and only would audit my case to make sure I was charged correctly. I do not understand why they couldn't tell me how much they charged for labor or the cost of the part.
These people are unethical, and do NOT deserve your business, time, or money.
www.beaconplumbing.net
I had a very unpleasant experience using Beacon Plumbing. First my hydronic heating system failed one night, and I troubleshoot the system to the best of my abilities. I reasoned that the circulator pump had failed. Not knowing the system well, I opted to call a plumber just to confirm my suspicions, or tell me what was really wrong with my heat. I called Beacon since they were a 24 hour service call, and I had no other experience. I WISHED I READ THE OTHER REVIEWS ON YELP BEFORE I CALLED! While on the phone I asked if they were familiar with hydronic heating and they were very quick to tell me yes, they were. When the service tech got there and I showed him the system, he was very lost. After a while he troubleshot the system and told me the exact thing I told him what I thought was wrong. He then proceed to tell me that I needed a $962 replacement pump, I bite my lip and said yes, because I did not want my kids to be without heat during the night. He then went through his truck and said he didn't have one and couldn't get one till tomorrow. I should have said don't worry about it and I would get one, but I didn't for some reason.
The next day he showed up and hour and a half later than when he said he would be there or call to update me. They installed the pump within 30 min and got the heat running. Later I looked up the pump that they installed and found out it retails for only $250!
I PAID $962!
I called Beacon and asked why a pump that retails for only $250 was $962 and they could only tell me that they include labor in the cost of the part. I asked why they could not tell me what the part actually cost and how much labor was and they refused. I was immediately transfered to someone else that would say the same thing and only would audit my case to make sure I was charged correctly. I do not understand why they couldn't tell me how much they charged for labor or the cost of the part.
These people are unethical, and do NOT deserve your business, time, or money.
Seattle, WA
We've used Price Busters multiple times now, first for sewer line repair and second for resolving an outdated and leaking faucet. Both times we were given expert service and extremely competitive pricing. Especially for the sewer they were able to undercut everyone by almost 50% since most contract out to them. Absolutely will use them again for any further plumbing work.
www.pricebustersplumbing.com
20907 Hwy 99, Lynnwood, WA 98036