Best Security Services in Phoenix AZ

Messaged him for quote on Friday, instantly. Made an appointmenfor aweekend, showed up on time, had my door rekeyed & made copies in less an 15 minutes. Very polite, fasservice, and prices are incredibly reasonable. Would definitely use h services again & would suggeshim to anyone needing locksmith services.

Very nice and on time. He got our office door open in just a few moments. Would definitely recommend this company to everyone

Awesome and fast service. And not a peep of criticism about how stupid I was to lock myself out of my flat. Five stars all day along for these folks!

The place to go for all your lock supply's

Needed a quick turn-around time on programming the key and the remote for my fussy 2003 Toyota Sequoia. Sundial was quick, courteous, friendly and prompt. Very conveniently located, nice waiting area - they let me on the wi-fi without my asking. A very pleasant experience. Highly recommend

I was very grateful to locate Adams Locksmith. I was locked out of my house at 6:30 at night. I contacted one locksmith who quoted a fee and then stated it could cost more depending on what all it would take to unlock the doors once he got onsite. My door locks were a standard brand so my thought was that surely a locksmith should be well equipped to unlock a standard brand lock under most circumstances without a potential upcharge once the job was done...little shady. Fortunately I decided to make another call and found Tom. He was at my house in 20 minutes, was extremely knowledgeable and had both my doors unlocked in less than 10 minutes. He also charged an extremely reasonable fee. If you’re in a pinch and need a reliable and trustworthy locksmith, give Tom/Adams Locksmith a call (he’ll personally answer the phone). Thanks again, Tom!

These guys were great and very flexible to work with my changing schedule. They came out and programmed the fob & cut the 2nd key my new driving . They are very friendly& professional locksmiths . Highly Recommended if we have any locksmith needs. Thanks guys!!!

Very happy with my experience with those locksmiths. The man showed up on time and replaced my old ignition professionally. Definitely would recommend them!

Scott is a great guy, and has very very good prices all over the valley and further sometimes. Definitely someone you can trust I personally been using him for years now.

Need a lock fixed changed or Re Keyed call Scott

When I needed to replace the lock on my car, this company delivered a locksmith within 30 minutes. Nice job!

Locked my keys in the truck. Call B1 for help and 10 minutes later he was there and had me in my truck minutes later. I also needed a new key remote and asked if he could program one for me and make me another spare truck key and was able to do both in the same visit. Really appreciated the service given when I wouldn’t have expected it with past locksmith experiences.

Friendly on the phone, professional locksmiths team , very quick and honest service for an interior, residential jammed lock!

They were quick honest and good with pricing

Wonderful, wonderful, wonderful. Showed up when they said and went above and beyond to make sure that our locks were fixed! Excellent service! A++++++++++++++

TL;DR Good service, abysmal workmanship.I had the ignition of my Honda Odyssey rebuilt by Acme in July 2017. Instead of properly performing the repair off-vehicle, they performed the repair in-situ and simply broke, cut, and drilled out whatever was in the way. The dealer estimated over $500 to repair the damage.-Long version below-Some time after having my ignition rebuilt I noticed I was able to remove the key from the ignition with the van in drive. It took awhile to notice because that's not something I regularly try. The repair was still within the warranty period but it wasn't worth chasing down so I let it go.Fast forward a few months and after a few near rollaway incidents I decided to get the issue fixed. Unfortunately the warranty had expired.Now normally I wouldn't complain. After all, it was my fault for letting the warranty lapse. However, what I found when repairing the ignition was so appaling that I feel I have to warn others.I got the first indicator of poor workmanship right when I got the vehicle back. There was a gap between the two halves of the steering column trim like they hadn't been clipped back together. It turns out that all of the clips on the lower piece had been broken off.No big deal, the part was cheap and easy to replace. I ordered one from Honda, installed it myself, and that was that for over a year.When I finally went to diagnose the interlock problem I noticed that the immobilizer receiver was only held in place by one screw instead of the usual two.To properly remove the immobilizer receiver, the ignition assembly must first be removed from the steering column. Honda uses breakaway bolts to secure their ignitions so removing them requires a little more work. However, it is not particularly difficult. I managed it in under half an hour despite having never done it before. I would imagine that someone with the proper tools (for example, a locksmith) could do it significantly faster.However Acme instead chose to do the repair in-situ. So after removing the one accessible screw, they simply broke the immobilizer receiver off.Honda ignitions aren't designed to be serviced. In order to replace the tumblers (which is what Acme did), the lock cylinder must be removed. The lock cylinder is held in the lock barrel by a through-hole roll pin. This is easy enough to remove. The lock barrel, on the other hand, is held in place by a roll pin in a blind hole. This makes it very difficult, though not impossible, for the average DIYer to remove.Thankfully there is a tool built specifically to remove this one roll pin. While it doesn't make sense to buy one to repair a single ignition lock since it's pretty expensive, it's a no brainer for someone who might repair a whole bunch of ignition locks (a locksmith, for example).However instead of simply removing the roll pin, Acme chose to render the lock housing incapable of retaining the lock barrel at all. They did this by drilling into the gap between the lock barrel and lock housing. As a result, the lock barrel was held in place solely by the broken immobilizer receiver. Unfortunately Honda's interlock system relies on a properly secured lock barrel so Acme's repair rendered it completely ineffective.Even more unfortunately, both the lock barrel and the lock housing were irreparably damaged. While the lock barrel is available from Honda as part of a recall kit, the lock housing is only available as part of a complete ignition assembly. Not only does this require you to pay over $200 for a whole bunch of unnecessary parts, it would still need to be re-keyed anyway.All told the dealer estimated over $500 to fix the damage done by Acme. Thankfully I was able to fix it myself for significantly less but it took dozens of hours of time and effort. Anyone less comfortable with tearing into their only vehicle would be out of luck.